Manufactured under GMP Conditions for Reproducibility Filtered through 0.2µm Filters Save Time Preparing Solutions

Almost all CE methods and CE capillaries and columns call for "conditioning" of the capillary and column before performing the run. These MicroSolv CE Conditioning Solutions are packaged under GMP Conditions and are ready to be injected into your capillary and will save you and your lab time. It is highly recommended that a "water plug" be used after each injection to improve injection precision. Lot number and Expiration Date on the bottle for good record keeping.

Catalog #	Description	Volume
02001-NaOH	Capillary Conditioning Solution, Sodium Hydroxide, 0.1N	100 ml
02300-HCl	Capillary Conditioning Solution, Hydrochloric Acid, 0.1N	100 ml
05080-W	CEWater™, CE Grade Water, Ultra Pure, Low Conductivity	80 ml

Easy to Use, Portable Built in Scale Aids in Measuring 15X Power

This hand held, easy to use inspection lens is an essential for any CE or CEC lab for quickly trouble shooting CE and CEC problems. Inspect for ragged capillary cuts, air bubbles, and cleanliness of detection windows. Supplied with a photo printed scale, this magnifier has a focusing ring and provides a 28mm wide field of view. A must for any lab.

Catalog #	Description
07210-M	HPCE Inspection Lens, 15X with Scale

Inspect Windows for Cuts & for Bubbles High Magnification Battery Powered Light Source Included

This stationary, Inspection Scope is a "must have" tool for doing CEC. While conditioning the columns, air bubbles must be completely purged to perform precise and reproducible CEC. Watch the air bubbles march past the detection window. Also can be used to make sure that the cuts on CE or CEC columns are "square" and not ragged. Two AA batteries and an extra lamp are included with every purchase. Magnification is 30X.

Catalog #	Description
07215-IS	CEC Inspection Scope, 30X with batteries and extra lamp